Summers Mounted Attachments - Manual (Page 8)

5
SECTION 1 - SAFETY
GENERAL ASSEMBLY SAFETY PRACTICES
YOU ARE RESPONSIBLE for the safe assembly
of the machine.
DO NOT ALLOW CHILDREN or other unauthorized
persons within the assembly area.
WEAR PERSONAL PROTECTIVE EQUIPMENT
which includes a hard hat, eye protection, work
gloves and steel toed boots with slip resistant
soles.
DO NOT MODIFY the equipment or substitute parts
in any way. Unauthorized modification may impair
the function and/or safety of the machine.
USE SUITABLE LIFTING DEVICE for components
which could cause personal injury.
BLOCK UP ANY RAISED PART of the machine. Be
sure machine is stable after blocking.
ALWAYS INSPECT LIFTING CHAINS AND
SLINGS for damage or wear.
BE SURE LIFTING DEVICE IS RATED TO
HANDLE THE WEIGHT.
STOP ENGINE, place all controls in neutral,
set parking brake, remove ignition key and
wait for all moving parts to stop before serving
or adjusting.
BE SURE PRESSURE IS RELIEVED from
hydraulic circuits before servicing or discon-
necting from tractor.
USE EXTREME CARE when servicing or
adjusting.
GENERAL ASSEMBLY INSTRUCTIONS
1. READ AND UNDERSTAND Operator’s Manual before assembly of machine.
2. Reference to “RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE REAR.
3. Reference to “FORWARD” means TOWARDS THE TRACTOR.
4. Reference to “REAR” means AWAY FROM THE TRACTOR.