Power Bright DX100-12 - Manual (Page 9)

7
2. Insert the cigarette lighter plug into the 12V
outlet.
1. Plug the DC cable into the DC cable port on the
DX100. Observe correct polarity.
3. Plug the device you want to operate into the
DX100 .
4. When the inverter is not in use, unplug it from the
12V outlet to prevent slight discharge of the
battery.
CAUTION: Reverse polarity damage
When plugging in the DC cable, ensure that the plug
aligns with the DC cable port. Failure to do so will
result in reverse polarity and a blown fuse.