Asus CRW-5232AS - Manual (Page 32)

32 ASUS CRW-5232AS
Connecting the drive cables
1. Connect the power
cable plug to the
power connector on
the rear panel.
2. Connect the 40-pin
IDE cable plug to the
IDE connector,
matching the red pin
stripe on the cable with Pin 1 on the connector.
3. If your computer has a sound card or an onboard audio feature, connect an
audio interface cable to the 4-pin analog audio connector on the rear of the
drive. Connect the other end of the audio cable to the connector on the sound
card or on the 4-pin CD connector on the motherboard.
All the cable plugs are slotted so that they fit in only one orientation. If a plug does not
fit in completely, try reversing it. DO NOT use too much force when fitting the cable
plugs. Replace the computer cover according to your computer manual.
Power Cable
IDE Cable
4-pin Audio Cable