Replacing a handset – AT&T EXPANSION EP5632 User Manual
Page 8

5
Getting started
Replacing a handset
When you are replacing rather than
adding a handset, for your handsets to
be numbered sequentially, you need to
delete all the handset registrations on
the telephone base.
To delete all the handset registrations:
. Press the
MENU softkey on the
telephone base in idle mode to enter
to the main menu.
2. Press the
UP and DOWN Navkeys to
select
Settings, then press the SELECT
softkey to enter the
Settings menu.
3.
Press the UP and DOWN Navkeys
to highlight
Delete Handsets, then
press the
SELECT softkey. The screen
will show
Delete Registration of all
handsets?
4.
Press the YES softkey.
After deleting the registrations of all
handsets, you will need to individually
register each handset with the telephone
base (see page 4 for registration
instructions).
Settings
Clear Voice Mail
Default Settings
Delete Handsets
SELECT
Delete Handsets
Delete Registration
of all handsets?
YES
NO
NOTE: After deleting
After deleting
the handset registrations,
each handset will reset and
Place in Charger will appear
on the handset display.
NOTE: If you replace
a registered handset,
the new handset will
be assigned the next
available registration
number, rather than the
handset number of the
handset you will replace.