Multiple handset use, Handset locator, Join a call in progress – AT&T CL82401 User Manual
Page 30: Handset locator join a call in progress

24
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace
any handsets.
To start the paging tone:
Press
/
HANDSET LOCATOR on the telephone base
to start the paging tone on all handsets for
60 seconds.
NOTE: If you press
OFF/
CANCEL
or
MUTE/
DELETE
on a handset,
the ringer of that handset stops, but the paging to the rest of the
handsets continues.
To stop the paging tone:
Press
PHONE/
FLASH
,
/SPEA�ER
SPEA�ER, or any dialing key
(
0-9, TONE , or #) on the handset(s).
-OR-
Press
/
HANDSET LOCATOR on the telephone base.
Join a call in progress
When a handset is already on a call and you would like to join the call, press
PHONE/
FLASH
or
/SPEA�ER
SPEA�ER on your handset.
Press
OFF/
CANCEL
or place the handset in the telephone base or charger to
end the call. The call does not end until all handsets hang up.
NOTE: You can use a maximum of 5 system handsets at the same time on an outside call.
If a sixth handset attempts to join the call, the handset screen shows
Unable to call.
Try again.
•
•
•
**Paging**
Multiple handset use