Avital AVISTART 4400 User Manual

Page 37

unique melody (or vibrate) and the remote start icon (19) will
turn off when the remote start shuts down.

valet

take-over

The Valet

Take-Over feature allows the vehicle to remain

running after the key has been removed from the ignition. This

feature is useful for occasions when you wish to exit and lock the

vehicle for short periods of time, but would like to leave the

motor running and the climate controls on.

To perform Valet

Take-Over:

1. Before turning off the engine, press and release

twice

within 3-seconds on the remote (or press and release the

optional momentary switch). Then wait five seconds. A

remote start page notification with a unique melody (or

vibration) will be generated and the LCD 2-way remote will

display the remote start icon (19) as long as the vehicle is

running. Then wait three seconds.

2. Turn the ignition key to the OFF position. (The engine will

stay running.)

3. The engine will run until the pre-programmed time elapses

or a shut-down input is received. (See the previous

Remote

Start section for a complete list of shut-down inputs.)

note: This feature will not work if the brake pedal is
being pressed.

➜