VHT The Classic 6 User Manual

Page 4

3. Led: LED will be lit when the switch is in the upward position (Power On); LED will be off when the switch is in the downward position (Power

Off).

4. Tone: Use this control to adjust the intensity of the high and low frequencies.

5. Volume: Overall volume adjustment. Turning this knob clockwise (0-10) increases the overall sound level.

6. Low Input Jack: Connect the cable from the instrument's output jack to this jack. This jack is provided for instruments that have extremely

high outputs (i.e., active pickups) that can result in distortion when connected to the HIGH INPUT JACK. Always use an undamaged, shielded

instrument cable.

7. High Input Jack: Connect the cable from the instrument's output jack to this jack if it has an average output (i.e., Strat-Style and Les Paul-

Style guitars). Always use an undamaged, shielded instrument cable.

B. THE REAR PANEL

Fig. 2: The Rear Panel

Line Out

1/4” output to recording equipment and sound reinforcement.

9. Power IEC Socket: Use the included power cord with this unit in accordance with the voltage and frequency ratings listed on this manual and

rear panel of this amplifier.