VHT Lead 20 - Manual (Page 5)

17: FX Send: This jack is used to send signal from the amp to external effects or signal processing devices.
18. Serial/Parellel FX: Allows you to select the desired type of effects loop, parallel or serial.
19. FX Return: This jack is used to receive signal from an external effects or signal processing devices.
20: Speaker Output (8 ohm): Used to connect an external speaker from the amplifier’s output (min 8 Ω), this switches out internal speakers.
21: Speaker Output (16 ohm): Used to connect an external speaker from the amplifier’s output (min 16 Ω), this switches out internal
speakers.
Technical Specifications
Name/Model VHT 20W Tube-Driven Amplifier / LEAD 20
Power Requirements & Consumption 120VAC, 60Hz ; 100/115VAC, 50/60Hz ; 220VAC/230VAC/240VAC, 50/60Hz
Total Output Power
20W RMS
Amp Type Tube Amp
Power-Amp Section (2) EL84 Tubes
Pre-Amp Section (4) 12AX7 Tubes
Speaker 1 x 12” Celestion G12 H30 (16 ohms)
Controls Clean Volume, Overdrive Gain, Overdrive Level, Reverb, Master Volume
EQ 3-Band - Treble, Mid, Bass
Reverb Accutronics/Reverb
Channels Dual with Drive Select - Clean and Overdrive
Jacks 1/4” Input, 1/4” FX Send, 1/4” FX Return, Serial Parallel FX Switch,
1/4” Footswitch Input, 1/4” 8 ohm Speaker Output, 1/4” 16 ohm Speaker Output
Cabinet Finger Jointed Birch
Cosmetics Black Tolex and Black Grille Cloth
Dimensions (H x W x D) 18.25” x 23.25” x 10.5” (464mm x 591mm x 267mm)
Net Weight 53.5 lbs (24.3 kg)
8
9