VHT Special 12/20 Head - Manual (Page 9)

1 2 3 4 5 6 7
8
REAR PANEL FEATURES
1. Footswitch Jack: Plug the Boost footswitch into this jack.
NOTE: THE BOOST FOOTSWITCH WILL ONLY FUNCTION WHEN THE VOLUME KNOB IS IN THE PULLED POSITION.
2. 9V DC Out: Plug the included 9V DC power supply cable into this jack to power your 9V DC pedal(s) or pedal board. The light will illuminate
at all times when powered on, unless the internal 9V DC fuse has blown. Maximum current draw = 1,000 mA.
3. Effects Loop Send and Return Jacks: The post-preamp Effects Loop can accommodate a wide range of effects. The send level is depen-
dent on the preamp gain. High preamp gain levels may overdrive some sensitive guitar-level effects pedals. Adjust the Effects Loop Send and
Return levels for best pedal sound and lowest noise.
6