HighPoint RocketU 1144C - Manual (Page 18)

18
7 Firmware Update
The firmware update utility must be run while the system is operating in a pure DOS environment. The
update utility cannot be run from a DOS-prompt window.
1. Visit the
www.highpoint-tech.com website to download the latest firmware.
2. Extract the download to a bootable DOS USB drive.
3. Boot the system using the bootable USB drive.
4. At the command prompt, access the firmware update’s directory:
5. The following command line is used to launch the flash utility:
104xfwdl.exe /u 1222_0E.bin
or use the Batch Files:
u.bat
6. After the firmware has been successfully updated, the following information will be displayed: