Hardware installation, Rocketcache 32xx adapter bios, Installing the rocketcache 32xx host adapter – HighPoint RocketCache 3244X8 User Manual
Page 4

4
Hardware Installation
Installing the RocketCache 32xx Host Adapter
Note: Make sure the system is powered‐off before installing the
RocketCache 32xx host adapter.
1. Open the system chassis and locate an unused PCI‐E (2.0 or 1.0) ×8 or
x16 slot.
2. Remove the PCI‐E slot cover.
3. Gently insert the RocketCache 32xx host adapter into the PCI‐E slot,
and secure the bracket to the system chassis.
4. After installing the adapter, attach the hard disks or disk enclosure to
the RocketCache 32xx host adapter using the Mini‐SAS cable.
5. Close and secure the system chassis.
RocketCache 32xx Adapter BIOS
After installing the RocketCache 32xx host adapter, and power on the
system, the BIOS should post. Verify the BIOS information to check if the
host adapter is installed and detected correctly: