Audiovox VOD1048 - Manual (Page 10)

Remote Sensor
The VOD1048 incorporates two Infrared sensors, which relay signals from the remote control to allow the
unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function
allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can
relay signals from most manufacturers’ remote controls to its respective component connected to the Video
1 input. In this case you must use the remote control supplied with the component.
Wireless Headphones (Optional)
The VOD1048 includes a built-in dual channel infrared transmitter for use with Audiovox wireless
headphones (Audiovox Part Number IR2CHS-Dual channel). The volume can then be adjusted using the
controls on each headset. The wireless headphones must be used within a line of sight from the transmitter,
as infrared transmissions, like visible light travel only in a straight line. See the documentation
accompanying your Audiovox wireless headphones.
Wireless Headset Special Features (Optional)
•
Automatic Level Control prevents input signal overloading.
• Uses high frequency infrared light to assure a clean signal for clear reception.
IR2 Input
Any line level audio source may be connected to this input (Satellite Radio, CD Changer etc). The audio
program connected to the IR2 input can be received on the B channel of the dual channel wireless
headphones (Audiovox Part Number IR2CHS).
Remote Sensor
Eyes
-9-