AT&T 9340 - Manual (Page 17)

15
TELEPHONE MEMORY
Replacing a Stored Number
You can replace a stored number by storing a new number in its place.
Follow the directions for “Storing Numbers in Memory.”
Storing a Pause in a Memory Number
While storing a memory number (see “Storing Numbers in Memory”) use the
softkey to select PAUSE where you want dialing to pause for two seconds.
Storing a Number and Name from call history in
Telephone Memory
You can store information received from Caller ID in the telephone memory.
(See CALLER ID OPERATION.)
1 Use < or > to scroll to the number you want to store.
2 Press U.
3 Use the softkey to select STORE.
4 Enter a memory location from 0–9.
Viewing Numbers in Memory
1 Press U.
2 Use the softkey to select DIR.
3 Select VIEW.
4 Press < or > to scroll through memory
— OR —
Enter the memory location from 0–9.
5 Press U to exit.
NOTE: When viewing numbers in memory, you can press
D
to
dial the number displayed on the screen.
Deleting/Editing Memory Numbers
1 Follow Steps 1 through 4 in “Viewing Numbers in Memory.”
2 To delete a number, use the softkey to select DELETE. The screen
prompts DELETE LOC.? Use the softkey to select YES.
3 The screen displays DELETED.
AT&T 9340 book_1ATT 11/3/98, 12:40 PM 15