Haws 5010.6427SS User Manual

Page 2

Text mode
Original mode

01/09

Model 5010.6427SS

Page 2 of 4

NOTE: To remove head when used with electric water cooler, keep the inlet nipple from turning
by holding it with locking pliers inside the fountain, beneath the basin.

Step 1: Gain access to flow adjustment screw by removing cover nut and button (see

Installation Drawing).

Step 2: Adjust flow with screwdriver: clockwise for more flow, counterclockwise for less.

Step 3: If desired flow is not obtained, clean screen located at base of valve body and make

sure screwdriver stop is fully opened.

Step 4: Replace button and cover nut.

Note: Replacement cartridge, screen, and gasket are available as P/N VRK5010.

HAWS

and other trademarks used

in these materials are the exclusive property of Haws Corporation.