EarthQuake Shell ShoXX Gamer set - Manual (Page 7)

Shell Shoxx Manual 7 Specifications are subject to change without notice
Setting Up Your Shell Shoxx System
1) Mount your Shell Shoxx Shaker to your chair. If using an office chair, be
sure to push down the plastic sleeve covering the center post. Tighten
securely once attached to the center post.
2) Use the velcro straps to secure the cord to the leg of your chair to prevent
rolling over it.
Attaching the Shell Shoxx Shaker to Your Chair
Connecting the Shell Shoxx Amplifier to the Shaker
1) Make sure your Shell Shoxx Amplifier is turned off before hooking it up to
the Shaker.
2) Connect the amplifier output cord (b) to the Shaker cord. Then connect it to
the Amplifier’s speaker output. Be sure to match the red terminal with the
positive connector (right) and the black terminal to the negative connector
(left).
3) Connect the power supply cord (a) from the Amplifier to a wall outlet.
To Amplifier Output Cord (b)
Amplifier
Speaker
Output
Amplifier Output Cord (b)