Wiring with the q10b tactile transducer – EarthQuake XJ-300FR User Manual
Page 13
XJ-300FR Manual 13
Specifications are subject to change without notice
Connecting to a Subwoofer/Tactile Transducer
Wiring with the THOR In-Wall Subwoofer
Receiver/Processor
+
_
Wiring with the Q10B Tactile Transducer
Receiver/Processor
+
_
Make sure the front toggle switch is set to “Low Pass” if
connecting to a subwoofer or tactile transducer.
Note: