Rosendahl nanoclocks GL - Manual (Page 14)

- 14 -
10. Specifications
Reference Inputs:
A, B 2 x BNC, internally terminated.
Video: 300mV sync, +/- 300mV tri-level.
auto detection of the following video standards:
576i47.95, 576i48, 576i50(PAL), 480i59.94(NTSC), 480i60,
720p50, 720p59,94, 720p60,
1080i47.95, 1080i48, 1080i50, 1080i59.94, 1080i60,
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30,
1080p50, 1080p59.94, 1080p60.
Audio:
AES11 or word clock signals, minimum level > 250mV.
auto detection of the following sample rate standards:
44.056, 44.100, 47.952, 48.000, or 88.112, 88.200, 95.904, 96.000 kHz.
Audio Clock Outputs:
1-12 12 x BNC
Word Clock: 3.5 Vpp @ 75 ohms
.
AES11 DARS: 1. 0 Vpp @ 75 ohms , high level mode 1.5 Vpp.
clock jitter < 10 ps RMS within the audio spectrum (20Hz - 20kHz)
Oscillators: 12.288 MHz (VCXO 1) 48 kHz, 96 kHz and multiple.
11.2896 MHz (VCXO 2) 44.1 kHz, 88.2 kHz and multiple.
16.369 MHz (GPS-TCXO) internal timebase better 0.2 ppm,
1,8 GHz PLL for -0.1% pull down rate generation.
USB: USB type B, device class compliant MIDI (USB audio).
plug & play with Windows XP or later, MAC OSX.
Rosendahl Sysex.
Power: AC:
Mains connector 3-pole IEC 60320/C14
Voltage selector switch 230 VAC or 115 VAC on left side.
Power consumption 7 watts.
DC:
XLR 4-pin connector, 12-24 VDC pin 1: GND, pin 4: Vcc
Dimensions: 44mm (H =1U) x 355mm (W) x 110mm (D without BNC connector),
19" 1U rack mout brackets are included, weight 1.95 kg.