Pure Evoke D2 Mio with Bluetooth - Manual (Page 18)

16
Appendix
Help and advice
I can’t see Evoke in the list of available Bluetooth devices on my mobile device
This may be because your Evoke Bluetooth visibility setting is set to ‘Off’. To make Evoke visible on your
mobile device, change Evoke’s Bluetooth visibility setting to ‘On’ (see page 12).
My mobile device is prompting me for a passcode when I try to pair with Evoke
Some legacy Bluetooth devices may prompt you to enter a passcode when trying to pair with Evoke. If this
occurs, enter the code ‘0000’.
Technical specifications
Radio Digital and FM radio
Frequencies DAB/DAB+/DMB-R/Parametric stereo decode up to 256 kbps
FM radio 87.5-108 MHz
Bluetooth A2DP support
Audio 1.6W RMS. Full-range 3” drive unit.
Input connectors 5.5V DC power adaptor socket (230V supplied), Mini USB connector for
product updates, 3.5mm Line-in for auxiliary devices
Output connectors 3.5mm stereo headphone socket.
Mains power supply Adapter: Input: AC 100-240V, 50/60Hz, 0.18A, Output DC 5.5V , 1.0A;
Main unit: DC 5.5V , 1.0A
ChargePAK Pure ChargePAK B1 rechargeable battery pack (available separately)
Power consumption Standby: 0.8W, Active: 1.7W
Dimensions 115 mm wide x 180 mm high x 120 mm deep
Approvals CE marked. Compliant with the EMC and Low Voltage Directives (2004/108/
EC and 2006/95/EC) ETSI EN 300 401 compliant.
Australian C-Tick N1600 and Electrical Safety.
Evoke_D2_Bluetooth_Mio_UKAus.indb 16 6/11/2014 11:31:21 AM