Pure Evoke Mio - Manual (Page 11)

9
ES EN
8. If you have selected a digital or FM radio alarm you
can push the Tune dial to select ‘Alarm volume’
and turn to adjust the volume level for the alarm
from 1 (very quiet) to 32 (very loud).
That’s it! You can see if the alarm is currently
switched on in the ‘Full screen time’ display (see
page 7). Alarms can be set and adjusted from
standby by pressing the
Timer button.
Note: An outlined bell shows that the alarm will not
sound within the next 24 hours.
Note: The alarm function does not work when
Evoke Mio is being powered by the ChargePAK E1.
Cancelling an alarm
When a tone alarm is sounding, push the Tune dial or
press Standby to cancel the alarm. To cancel a digital
radio or FM radio alarm and return the radio to standby,
press the
Standby button.
08:30
08:30
22:45
08:30
08:30
The alarm is set to
sound at 8:30 am
Alarm volume
08
10
EvokeMio_DG_manual-Euro.indb 9 7/25/2013 5:24:09 PM