Pure DMX-50 - Manual (Page 18)

6
Hints and Tips
I don’t see any Intellitext
This could be because you haven’t tuned to a participating station or the station hasn’t broadcast
any Intellitext since you tuned in. Try tuning to a participating station, wait and then check again.
(>>/<<) DAB Secondary services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. If a station has secondary services available, the
station shows ‘>>’ next to its name in the station list and the secondary service appears next to
the station in the list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but are not currently
available. Inactive stations have a ‘?’ before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous station.
Display says ‘No stations available’
Try adjusting your aerial or radio position. Use Autotune to search for stations.
Alarm bell icon has a cross through it
This happens if you set an alarm but no DAB or FM RDS time has been acquired yet. Check that
your aerial is extended, return to DAB/FM or standby and wait for a short period.
Resetting your radio
Resetting your DMX-50 removes all presets, stored stations and favourite stations, Intellitext and
alarm/timer settings and resets all options to defaults. To reset:
1. Press and hold the MENU button for three seconds. The screen shows ‘Do you want to reset?’.
2. Confirm the reset or press no buttons to cancel the reset.
Technical Specifications
General Fully compliant with ETS 300 401 and capable of decoding all DAB
transmission modes 1-4 up to and including 192 kbps.
Frequency range DAB Band III 174-240, FM 87.5-108
Amplifier power 40W RMS per channel output (into 8 Ohms @10% THD+N, A-weighted).
CD Player CD-R and CD-RW playback compatible. Support for CD Text. MP3 playback,
including support for ID3 tags and M3U playlists.
SD card Record DAB radio and playback MP2/MP3. Red SD record warning LED.
Maximum supported capacity of SD card is 2GB.
Speakers 8 Ohms (nominal) impedance. 40W RMS power handling. Polypropylene
mid-bass drivers. Two-way rear ported enclosure. Custom-tuned 2nd order
crossovers.
Connectors 3.5 mm headphone output. RF F-connector 75 Ohms DAB/FM aerial
connection. Two dual-phono line-level inputs. Dual phono for stereo
analogue line-level or variable-level output. Optical Toslink connector for
digital S/PDIF output (IEC958 @ 48 kHz). USB (B type) connector for future
software upgrades and SD card access. Spring-clip terminals for speakers.
Mains power supply 240V 60W with removeable Euro/UK power socket adapter.
Approvals
CE marked. Compliant with the EMC and Low Voltage Directives (89/336/
EEC and 73/23/EEC).
Dimensions (mm) Main unit 166 (w) x 240 (h) x 252 (d); speaker 150 (w) x 240 (h) x 255 (d).