AT&T 874 - Manual (Page 22)

20
Storing Numbers in Memory
1 Press and release G.
2 Enter the telephone number you want to store (up to 16 digits)
— OR —
Press and release
R to store the last number dialed.
3 Press the memory button where you want to store the number.
Storing a Pause in a Memory Number
To store a dialing pause in a memory number, press and release P where
you want the dialing pause to occur. Each time you press P, you enter a
two-second pause in the dialing sequence.
Storing a Temporary Tone Signal in a Memory Number
To store a tone signal, press and release t where you want tone dialing
to begin. All digits entered after this will send tone signals.
Storing Flash in a Memory Number
You can store the switchhook flash needed to access some custom-calling
services in a memory number. Press and release
F where you want the
switchhook flash to occur in the dialing sequence.
Erasing Memory Numbers
To remove a number from memory, you can store another number in its
place. To clear a memory location and leave it empty:
1 Press and release G.
2 Press and release P.
3 Press the memory location to be erased.
TELEPHONE MEMORY