Pure ONE Classic Series 2 - Manual (Page 16)

12
Language
Turn the dial to select a language (English/French/German/Italian) and push to confirm
Energy saving
One Classic is part of the Pure EcoPlus product family, designed and manufactured to minimise
power consumption when the unit is switched on and in standby. One way this low power
consumption is enabled is by not collecting and storing Intellitext messages when the unit is in
standby. Two options are available:
On (default): One Classic updates the Intellitext data when you tune to a station that broadcasts
Intellitext. Intellitext data is not collected in standby.
Off: One Classic collects Intellitext data in standby from the last station viewed Intellitext, which
increases standby power consumption.
Note: If you fit the optional ChargePAK C6L or 6 x ‘C’ batteries the unit will switch off when you
press the Standby button and not enter standby, as long as the unit is not connected to
mains power.
Software upgrade
Software updates for your One Classic may be made available in the future. If you register your
product and include a valid e-mail address you will receive notification of software updates
(register at www.pure.com/register). Available software updates are also listed at
http://support.pure.com.*
To upgrade your radio
1. Press and hold the Menu button for three seconds to access the maintenance menu.
2. Select Upgrade and follow the instructions provided with the upgrade software*.
Factory reset
Resetting your radio removes all presets, clears the station list, any Listen Later programmes
and resets all options to their defaults.
To reset your radio, select Factory reset and push the dial to confirm the reset.
*Requires a PC (not Mac) with internet access running Windows XP/Vista/7 and a suitable USB cable (not included).