Pure Chronos - User Guide - Manual (Page 11)

7
To save a preset
Press the Preset button, use the +/- buttons to browse the
presets list then press and hold the Preset button for around
three seconds to store the current station to the selected preset. .
The station is added to the presets list overwriting any previous
station and the preset number appears next to the name on the
station list.
To recall a preset
Press the Preset button, use the +/- buttons to browse the
presets list then press the Select button to recall the preset
shown on screen.
Autotune
You may want to perform an autotune if you move your radio or if
you want to receive a new multiplex.
The autotune option automatically scans the DAB frequency
range and stores all the stations found in the station list for easy
selection. Note Ensure your aerial cable is extended (ideally
vertically) before starting an autotune.
To perform an Autotune
Press the Autotune button to perform a full autotune scanning
the full Band III frequency range.
Alternatively press the Menu button and use +/- and Select
buttons to choose one of the following options:
Autotune... 12
Autotune in progress