Pure Elan RV40 - Manual (Page 12)

10
Check with the broadcasters to find out if they use DRC.
DRC full
Applies the DRC level as sent with the broadcast.
DRC half DRC level is set to half that sent with the broadcast.
DRC off Any DRC level broadcast will be ignored.
Set clock
Manually set the time and date if required. If you have good DAB or FM reception these will
automatically be updated from the radio signals.
Station Order
Alphanumeric Lists all stations in alphanumeric order.
Active station Lists active stations first on the station list.
Multiplex Lists stations in groups according to their multiplex.
Trim stn. list Removes inactive stations from the station list.
Tuning
Autotune
Scans all DAB Band III frequencies for stations and adds any new ones to the station list. To
stop an Autotune press Select.
Manual tune
Shows DAB signal level which can help you find the best position for your radio.
1.
Use the +/- buttons to scroll through different channels and push Select to choose one
(UK stations are in the range 11B to 12D). You see a signal level display. The empty
block indicates the minimum required level for reception and the filled blocks indicate
the current level.
2. Move your aerial and to try to raise the current level to the empty block or beyond. Once
you have a good signal the display will show the multiplex name and add the stations to
the station list.
3. Push the Menu button to exit or +/- and Select buttons to change channel.
Upgrade
Upgrade your radio using a PC connected to the USB socket. Upgrades may be issued to
provide enhanced functions or improve performance. The version number of your radio is
displayed on the top line.
Register your product and include an e-mail address to receive notification of product
upgrades or visit our website at www.pure.com/support.
To upgrade, select the Upgrade option and follow the instructions provided with the upgrade.
To exit the upgrade menu press the Menu button.