Pure Tempus-1XT - User Guide - Manual (Page 4)

2
Quick start
This section provides information on how to set up and start using your radio.
1
Fully extend the aerial, connect the mains adapter and plug in to your power supply.
2
Press the Standby button to switch the unit on.
The screen lights up and a progress bar indicates the progress of an autotune to find the stations available. If
you live outside the UK this local autotune may find very few or no stations. If no stations you see the message
‘No stations available’ and you see a menu of options. Use the Tune knob to scroll through and select the
‘Autotune full’ option. Alternatively if very few stations are found hold down the Autotune button for over 2
seconds. This full autotune may take a minute or more.
3
Adjust the volume control if required.
4
Turn the Tune knob to see all the stations available. Push to select and listen to another station.
5 Press the Info button and repeat to cycle through the display modes including the full screen clock.