Pure Twilight - Manual (Page 5)

5
GB
Straighten and position the aerial for good reception. Insert the
connector of the supplied mains adapter into the 5.5V DC input on the
rear of the radio. Plug the adapter into the mains supply and switch on.
The
Twilight logo is displayed briefly. Do not touch Twilight during this
time, as touch sensitivity may be affected.
Choose your on-screen language ( English , French , German or Italian )
by pressing the + and - buttons to highlight the language you want.
Press Select to confirm your choice. Twilight will then perform an
autotune and tune into a digital radio station (see page 9).
Press Source to select an audio source from the following options:
Digital radio See page 9
FM radio See page 10
PURE Sounds See page 11
Lullabies See page 10
Auxiliary input See page 12
Getting started
Digital radio
FM radio
PURE Sounds
Lullabies
Auxiliary input
The audio source screen