Pure John Lewis J1 - Manual (Page 14)

12
Help and specifications
Secondary and inactive stations
(<>) Secondary DAB services
Secondary services accompany some stations, providing extra information or alternative content and
may only be broadcast at certain times. If a station has secondary services available, the station
shows ‘>>’ next to its name in the station list and the secondary service appears next to the station
in the list. A secondary service has a ‘<<’ before its name in the station list.
(?) Inactive or unavailable DAB stations
Inactive or unavailable stations are those which appear on the station list but are not currently
available. Inactive stations have a ‘?’ before their name on the station list. If you select a station
which has this symbol, your radio tries to tune in or returns to the previous station.
Troubleshooting
Display says ‘ No stations available’
Use Autotune (page 10) to search for stations. Try adjusting your aerial or radio position.
Receiving new DAB stations that have started broadcasting
Use Autotune (page 10) to scan for new stations. Any new stations that you can receive will be
added to the station list.
Resetting your radio
Resetting your radio removes all presets and stored stations and resets all options to defaults.
1. Press and hold the Menu button for three seconds.
2. Press Select to confirm the reset or press no buttons to cancel the reset.
Technical Specifications
DAB Digital radio with full Band III, L-Band and FM reception. ETS 300 401 compliant
and capable of decoding all DAB transmission modes 1-4 up to and including
256 kbps. DAB+ supported as standard in certain countries and available as an
upgrade in others.
Frequency ranges DAB Band III 174–240 MHz, DAB L-Band 1452-1491 MHz, FM 87.5–108 MHz.
Audio 2.75 " full-range speaker. 1.7W RMS amplifier. Active speaker equalization filter.
Input connectors 5.5V DC power adaptor socket (230V supplied). USB connector for upgrades.
Output connectors 3.5mm stereo output for headphones.
LCD Display 16 x 2 characters, plus additional function icons. Auto-dimming backlight.
Mains power 230V AC to 5.5V (1A) DC external power adapter (supplied).
Power consumption Standby: less than 1 Watt. Active: 2 Watts average dependent on use.
Approvals CE marked. Compliant with the EMC and Low Voltage Directives (89/336/EEC and
73/23/EEC).
Aerial Wire aerial attached.
Dimensions (mm) 135 wide x 150 deep x 58 high.
Help and specifications