Setting the alarms, How to set an alarm – Pure Siesta iDock User Manual
Page 11

9
EN
B]^^iT()$&
To snooze an alarm
When an alarm is sounding press the Select/Snooze button or the −/+ buttons to silence
the alarm for ten minutes (the default snooze time). The remaining time left until the alarm
sounds again is shown at the bottom of the display.
Setting the Alarms
Siesta iDock has four alarms. When activated, an alarm either switches the radio on (if in
standby) and tunes to a DAB or FM radio station, activates and plays your iPod/iPhone (if
docked) or sounds a beeping alarm tone.
How to set an alarm
1.
Press and hold the Alarm button (1-4) that you wish to store the alarm to. This will
start the alarm setup.
4
0[Pa\#BTcd_
0[Pa\>]
2. Using
the
+/— and Select buttons, set the following options for your alarm:
On/Off
Switch the alarm on or off
On time
Set the time you want the alarm to start (hours:mins)
Source
Choose DAB, FM, iPod or tone as the sound source you want to
use for the alarm
Last Used/
For DAB and FM source, choose a station for the alarm to play.
Preset
‘Last Used’ will tune to the last station received by the radio.
‘Preset’ lets you select one of your saved stations.
Once
The alarm will sound at the time you have selected and not
repeat.
Daily
Every
day
Weekdays
Monday to Friday, every week
Weekends
Saturday and Sunday only
Finally, adjust the volume level for the alarm (represented by a bar on-screen) using the +/−
buttons and Select to confirm.
That’s it! You can see which alarms are currently switched on by looking at the numbered
alarm icons on the screen.
For
example:
APSX^!
0\hbcTahc^dac
Alarm 1 is
currently set