Pure Jongo S3 - Quick Start Guide - Manual (Page 7)

5
Connect Jongo to your Wi-Fi
Insert the connector of the supplied mains
lead into Jongo and switch Jongo on .
When the Power light turns solid green, briefly
press the
Wi-Fi button on the back and wait
for the Power light to flash amber.
Note: If you press and hold the Wi-Fi button,
your Jongo will start WPS compatible pairing
mode. To continue with the standard setup,
briefly press the
Wi-Fi button on the back of
your Jongo and wait for the power light to
flash amber before proceeding to step 2.