Pure Jongo T2 - Manual (Page 11)

9
Adding another Jongo to your
network?
Carry out the following steps to add a new Jongo to your network:
A. Switch on your new Jongo.
B. Press and hold the Wi-Fi button on any other Jongo that is already connected to
your network until the Power light pulses green.
C. Press and hold the Wi-Fi button on the back of the new Jongo until the Power light
pulses green.
After about 30 seconds, the Power lights on both Jongos will light solid green to
confirm that the new Jongo is connected to your network.