Outback Power Systems AXS Card SunSpec Modbus Interface Installation Instructions - Manual (Page 2)

AXS Card Installation Instructions
2
Contact Information
Address: Corporate Headquarters
17825 – 59 th Avenue N.E.
Suite B
Arlington, WA 98223 USA
European Office
Hansastrasse 8
D-91126
Schwabach, Germany
Telephone: +1.360.435.6030
+1.360.618.4363 (Technical Support)
+1.360.435.6019 (Fax)
+49.9122.79889.0
+49.9122.79889.21 (Fax)
Email: [email protected]
Website: http://www.outbackpower.com
Part Number, Date and Revision
900-0149-01-00, August 2013, Revision A
5. Install the alternate AXS cover (included).
NOTE: Attach a ferrite clamp (included) to both the
Ethernet cable and the RTS cable after installation.
Installation is complete. See the AXS Port SunSpec Modbus Interface Owner’s Manual for use.
4. Insert the card into the compartment.
Seat it firmly.
Depress these tabs while inserting.