Asus A7V8X-X - Manual (Page 48)

2-18 Chapter 2: BIOS Information
AGP Drive Strength [Auto]
Configuration options: [Auto] [Manual]
AGP Drive N Control [E]
Configuration options: [0][1][2][3][4][5][6][7][8][9][A][B][C][D][E][F]
AGP Drive P Control [F]
Configuration options: [0][1][2][3][4][5][6][7][8][9][A][B][C][D][E][F]
AGP performance control [Disabled]
Configuration options: [Disabled] [Enabled]
AGP Fast Write control [Disabled]
Configuration options: [Disabled] [Enabled]
Video Memory Cache Mode [UC]
USWC (uncacheable, speculative write combining) is a new cache technology for
the video memory of the processor. It can greatly improve the display speed by
caching the display data. You must set this to UC (uncacheable) if your display
card does not support this feature, otherwise the system may not boot.
Configuration options: [UC] [USWC]
Delayed Transaction [Disabled]
When set to [Enabled], this feature frees the PCI bus when the CPU is accessing
8-bit ISA cards. This process normally consumes about 50-60 PCI clocks without
PCI delayed transaction. Set this field to [Disabled] when using ISA cards that are
not PCI 2.1 compliant. Configuration options: [Enabled] [Disabled]
Onboard PCI IDE [Both]
This field allows you to enable either the primary IDE channel or secondary IDE
channel, or both. You can also set both channels to [Disabled]. Configuration
options: [Both] [Primary] [Secondary] [Disabled]
DRAM Burst Length
Configuration options: [4] [Auto]
S2K Bus Driving Strength
Configuration options: [Auto] [Manual]
S2K Strobe P Control
Configuration options: [0][1][2][3][4][5][6][7][8][9][A][B][C][D][E][F]
S2K Strobe N Control
Configuration options: [0][1][2][3][4][5][6][7][8][9][A][B][C][D][E][F]