Outback Power Systems FW-IOB-S-120VAC Input/Output/Bypass Assembly - Installation Instructions - Manual (Page 7)

Installing the FW250 AC Bypass Slide Plate
Figure 4: FW250 AC Bypass Plate Installation
Parts:
1. 8-32 X .75 Machine Screws (2)
2. 8-32 Nylock Nuts (4)
3. Nylon Washers (4)
4. FW250 AC Bypass Slide Plate (1)
To Assemble:
1. A partial view of the FLEXware 250 chassis is
shown for slide plate assembly clarity.
2. Remove the necessary circuit breaker
knockouts first.
3. Install the AC Bypass Slide Plate as shown in
the illustration. Do not over tighten the
Nylock nuts. Overtightening can cause the
AC Bypass Breaker Slide Plate to bind.