Night Owl CS-Watch-4GB - Manual (Page 12)

11
1. To turn on the video watch, press and hold the Start/Stop
button for 2 seconds, the red LED indicator will come on
and turn green to indicate the video watch is on and ready
for use.
2. Press the Snapshot Button once. The LED indicator will
turn red for about a second and then turn back to green
after a picture has been taken.
Your video watch will automatically shut down if not
used for 30 seconds. The LED indicator will flash red six
times then the video watch will automatically shut down
when memory card is full.
Chapter 8: Taking a Picture