Monoprice 9742 Wii to HDMI Converter - Manual (Page 3)

Wii2HDMI specification
3
Setting the Wii Video Output to 480p Mode
It is a basic fact that the higher quality signal you have going into a device, the better
will be the quality of the signal coming out. The same is true for this device. To
obtain the best video results, you should set your Wii console to use the 480p video
output.
To change the setting on your Wii, perform the following steps:
1. Make sure that the Wii console is powered off and that no disc is in the tray.
2. Power on the Wii console and navigate to the Wii Channel menu. Click on the
"Wii" button on the lower left side of the screen.
3. On the next screen, select the "Wii Settings" option on the right side of the screen.
4. From the "Wii System Settings 1" screen, select the "Screen" button.
5. On the "Screen" menu, click the "TV Resolution" button.
6. On the "TV Resolution" screen, select the "EDTV or HDTV (480p)" button. Click
the "Confirm" button on the lower right side of the screen to confirm your choice.