Monoprice 6999 Ethernet over Power Adapter - Manual (Page 7)

6
1.6 LED Definitions
LED State Description
ON
Powerline network activity.
Powerline Link Status;
Green – Good
Orange – Normal
Red – Poor
Powerline
OFF Search or no Powerline network activity.
ON
Ethernet connection is OK.
Auto switch to Normal Mode.
Flashing Data transferring. Ethernet
OFF
No Ethernet link.
*Auto switch to Standby Mode after 2 second while No Ethernet Link.
ON Power on.
Flashing *Auto flashing every 0.5 second when switch to Standby mode. POWER
OFF Powerline off or failure.
* Standby mode: This mode is energy saving mode, comply with EuP Standard. This device will auto to
enable the Standby mode while no Ethernet Link.
1.7 Interface Description
Interface Description
RJ-45 Port Connect to the Ethernet Cable
Secure Button Button can auto secure and group the Powerline devices.
Reset Button Push this button can reset to the factory default settings.
1.8 System Requirements
‧Ethernet device
‧AC power outlet
‧Windows system for encryption setup