C-TECH-I Imperiale LI-VLV-13 - Manual (Page 2)

C-TECH-I, INC
USERS' GUIDE
Installation
Faucet body
Flexible hose
Valve seat
Spout
Water supply (hot)
Water supply (cold)
Wall
1. Mount the faucet body and the valve seat into the wall.
2. Attach one end of the flexible hose to the faucet body, with the other end to the
outlet of the valve seat.
3. Connect the faucet to the water supply.
4. Screw the spout onto the faucet body with some thread sealant.
5. Tighten all the joints.
Maintenance:
1. According to the water quality, periodically disconnect the aerator cover for
cleaning to avoid jam (See figure 1, figure 2 and figure 3). It will prevent the
leakages and cartridge damage if the spout jams;
2