C-TECH-I Beoni LI-UK-T400 - Manual (Page 3)

C-TECH-I, INC
USERS' GUIDE
4. Take the rubber washer and the plate washer through the cartridge seat. Then
revolve the locknut onto the cartridge seat（See figure 4 and figure 5）;
21 and 22
17
18
Figure 4
21 and 22
17
18
19
Revolve
20
Figure 5
5. Revolve the locknut and fix the faucet on the sink by the washers;
Figure 6
21 and 22
17
18 20
19
6. Before connecting the inlet hose to the indoor water supply pipe, you should
pay attention to the three points as follow:
1) Flush the pipe;
Flush the pipe
2) There are no stings at the ends of the water supply pipe;
3) Using other seal materials at the ends of the inlet pipe is not allowed.
3