Anthem Integrated 225 - Manual (Page 10)

3.1 POWER ON/OFF
Power on is indicated when the LED above the from panel power button is lit.
Front panel – power ON/OFF
• Press POWER in the lower left of the front panel.
Remote control – power ON
• Press ON in the upper right.
Remote control – power OFF
• Press STANDBY key in the upper left.
3.2 SOURCE SELECTION
Select a source by pressing one of the following buttons:
When RECORDER is selected, the REC output is disabled since a recorder cannot record itself.
3.3 VOLUME CONTROL
Front panel:
• Rotate the volume knob clockwise to increase the volume and counterclockwise
to decrease the volume.
Remote control:
• PRESS the VOL+ and VOL keys.
Mute:
When MUTE is pressed, the audio is silenced and the front panel indicator
above the button flashes. Press MUTE again and sound will return.
3. OPERATION
POWER
MUTE
PHONO CD BALANCED
RECORDER
AUX 1 AUX 2 AUX 3 AUX 4