Yetter 2967-135 Residue Manager Attachment for Case Coulter - Manual (Page 4)

4
TABLE OF CONTENTS
FORWARD…………………………………………………..…………………………………………………... 2
SAFETY INFORMATION……….…………………………………………………………………………….…3
TABLE OF CONTENTS………………………………………………………………………………………....4
TORQUE SPECIFICATIONS…………………………………………………………………………………...4
ASSEMBLY INSTRUCTIONS……………………………………..…………………………………………...5
OPERATING INSTRUCTIONS………………………………………………………………………………….6
PLANTER HEIGHT ADJUSTMENT……………………………………………………………………………7
MAINTENANCE………………………………………………..…………………………………………………8-13
PART IDENTIFICATION…………………………………………………………………………………….….14-16
BOLT TORQUE
READ THESE INSTRUCTIONS FIRST:
1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts are
staying tight.
4. The chart below is a guide for proper torque. Use it unless a specified torque is called out elsewhere in
the manual.
5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the handle or
bar.
6. Use a torque wrench whenever possible.
The following table shows torque in ft. lbs.