Yetter 2966-002 Residue Manager for 60/90 Air Seeder Opener User Manual
Page 11
11
MAINTENANCE
Lubrication Symbols
Lubricate with grease at hourly interval indicated on symbol.
Lubrication Intervals
IMPORTANT: The recommended service intervals are based on normal conditions;
severe or unusual conditions may require more frequent lubrication.
Perform each lubrication and service procedure at the beginning and end of each season.
Clean grease fittings before using grease gun, to avoid injecting dirt and grit into the
bearing. Replace any lost or broken fittings immediately. If a fitting fails to take grease,
remove and clean thoroughly, replace fitting if necessary. Also check for failure of
adjoining parts.
BEARING REPLACEMENT INSTALLATION
1. When assembling the spoke wheels, bearing assembly and hubcap, be sure to
align the grease transfer hole in the spoke wheel with the groove in the hubcap
and hole in the hub to allow grease passage.
2. Assemble the wheels, hubs and caps.
3. Grease the wheel/hub/bearing assembly.
- 1300 Seed Jet II (28 pages)
- Avenger 25 (40 pages)
- Avenger 30 Coulter (28 pages)
- 1200-001 Row Unit Adjusting Device (6 pages)
- 1300 Series Bulk Seed Handling Equipment (54 pages)
- 1310-010 Maximizer (44 pages)
- 2000 Series AllSteer Plus Fertilizer Toolbar (52 pages)
- 2000 All Steer High Capacity Cart (56 pages)
- 2000 Series Vertical Tillage Tool (V.T.T.) (56 pages)
- 2570-594 Wheel Assembly and Lubrication of Bearing Assembly (6 pages)
- 2900 Series Spring Cushioned Plow Coulter (2 pages)
- 2910-041 Frame Mount Coulter (16 pages)
- 2910-114 HD Liquid Fertilizer Kit, 2910 (2 pages)
- 2910-130-HD Heavy Duty Coulter (12 pages)
- 2910-135 Injector Kit (7 pages)
- 2910-137 High Clearance Injector Kit (8 pages)
- 2920 Disc Sealer (16 pages)
- 2920 Series Max Sealer Plus (16 pages)
- 2920-020 Sealer Wheels W/2920-212 Bracket (2 pages)
- 2930 Series Coulter (2 pages)
- 2940 Short Floating Air Adjust Residue Manager (86 pages)
- 2940-010 Combo (14 pages)
- 2940-055 Hydraulic Compressor (24 pages)
- 2950 Series Coulter (2 pages)
- 2959 Row Unit Mounted Fertilizer Coulter (12 pages)
- 2959-104 Spring Mount Inj. (3 pages)
- 2960-013 Space Saver Unit Coulter (16 pages)
- 2960-033 TITAN Series (28 pages)
- 2960-020 Unit Mounted Conservation Coulter for 800/900/950/955/1200 Cyclo Planters (12 pages)
- 2960-127 No-till Coulter (16 pages)
- 2960-130 Unit Mounted (12 pages)
- 2961-010-015 Cut and Move Coulter/Residue Manager Opener (28 pages)
- 2961-012 Cut and Feed Coulter/Fertilizer (28 pages)
- 2961-012 Guidelines (1 page)
- 2962 R.U.M.D.D.F.O. (28 pages)
- 2963 Challenger (28 pages)
- 2966-001 Residue Manager for 60/90 Air Drill Opener (16 pages)
- 2966-020 JD Hydraulic Drive Twin Row (16 pages)
- 2966-199 Shield Kit For Floater Wheels (2 pages)
- 2967 Series Screw Adjust Residue Manager (36 pages)
- 2967-001 Residue Manager (24 pages)
- 2967 Notched Disc Residue Manager (24 pages)
- 2967-002 Single Wheel Residue Manager for Twin row (18 pages)
- 2967-003 Single Wheel Residue Manager For Monosem Planter (18 pages)