Yetter 2570-594 Wheel Assembly and Lubrication of Bearing Assembly - Manual (Page 6)

MAINTENANCE
Storing the Equipment
Store the machine in an area away from human activity
Store machine in RAISED position.
Install service locks on all wheel cylinders.
At the end of the season, the machine should be thoroughly inspected and
prepared for storage. Repair or replace any worn or damaged components to
prevent down time at the start of the next season. Store machine under cover
with all parts in operating condition.
• Clean machine thoroughly to remove all dirt, debris and crop residue,
which would hold moisture and cause rusting.
• Inspect machine for worn or broken parts. See your Yetter Farm
Equipment dealer during the off-season so that parts or service can be
acquired when machine is not needed in the field.
• Lubricate bearings as outlined in the Lubrication section
• Paint all parts which are chipped or worn and require repainting.
• Store machine in a clean, dry place with the planting unit out of the sun.
• If the machine cannot be stored inside, cover with a waterproof tarpaulin
and tie securely in place.
• Do not allow children to play on or around the machine
YETTER MANUFACTURING CO.
FOUNDED 1930
Colchester, IL 62326-0358
Toll free: 800/447-5777
309/776-3222 (Fax)
Website: www.yetterco.com
E-mail: [email protected]