Service, Belt replacement instructions – Yetter 1310-010 Maximizer User Manual
Page 9
9
SERVICE…
1. Check engine oil level daily.
2. Change engine oil every 25 hours.
3. Check for oil leaks daily.
4. Grease bearings every 50 hours.
5. Check bearings annually.
6. Check belt tension and adjust as required. Belt tension should be just enough to drive the belt. Belt will
require 10 hours of operation to break in. Some adjustment may be required at this time.
7. Belt and splice should be in good condition, check daily.
BELT REPLACEMENT INSTRUCTIONS
Route both ends around head and tail roller, slide belt forward and back through tube so ends
of the belt meet at a convenient location.
Align and interlace belt and clipper lacings. Slip splice pin through clipper lacings to secure.
NOTE: The clipper lacings are connected on a metal strip that needs to be broken to allow
the belt to flex.
Tighten belt by turning adjustment nuts on head roller assembly in. Tighten evenly on each
side until belt is tight.
To train belt, see belt training instructions in this manual.
- 1300 Seed Jet II (28 pages)
- Avenger 25 (40 pages)
- Avenger 30 Coulter (28 pages)
- 1200-001 Row Unit Adjusting Device (6 pages)
- 1300 Series Bulk Seed Handling Equipment (54 pages)
- 2000 Series AllSteer Plus Fertilizer Toolbar (52 pages)
- 2000 All Steer High Capacity Cart (56 pages)
- 2000 Series Vertical Tillage Tool (V.T.T.) (56 pages)
- 2570-594 Wheel Assembly and Lubrication of Bearing Assembly (6 pages)
- 2900 Series Spring Cushioned Plow Coulter (2 pages)
- 2910-041 Frame Mount Coulter (16 pages)
- 2910-114 HD Liquid Fertilizer Kit, 2910 (2 pages)
- 2910-130-HD Heavy Duty Coulter (12 pages)
- 2910-135 Injector Kit (7 pages)
- 2910-137 High Clearance Injector Kit (8 pages)
- 2920 Disc Sealer (16 pages)
- 2920 Series Max Sealer Plus (16 pages)
- 2920-020 Sealer Wheels W/2920-212 Bracket (2 pages)
- 2930 Series Coulter (2 pages)
- 2940 Short Floating Air Adjust Residue Manager (86 pages)
- 2940-010 Combo (14 pages)
- 2940-055 Hydraulic Compressor (24 pages)
- 2950 Series Coulter (2 pages)
- 2959 Row Unit Mounted Fertilizer Coulter (12 pages)
- 2959-104 Spring Mount Inj. (3 pages)
- 2960-013 Space Saver Unit Coulter (16 pages)
- 2960-033 TITAN Series (28 pages)
- 2960-020 Unit Mounted Conservation Coulter for 800/900/950/955/1200 Cyclo Planters (12 pages)
- 2960-127 No-till Coulter (16 pages)
- 2960-130 Unit Mounted (12 pages)
- 2961-010-015 Cut and Move Coulter/Residue Manager Opener (28 pages)
- 2961-012 Cut and Feed Coulter/Fertilizer (28 pages)
- 2961-012 Guidelines (1 page)
- 2962 R.U.M.D.D.F.O. (28 pages)
- 2963 Challenger (28 pages)
- 2966-001 Residue Manager for 60/90 Air Drill Opener (16 pages)
- 2966-002 Residue Manager for 60/90 Air Seeder Opener (20 pages)
- 2966-020 JD Hydraulic Drive Twin Row (16 pages)
- 2966-199 Shield Kit For Floater Wheels (2 pages)
- 2967 Series Screw Adjust Residue Manager (36 pages)
- 2967-001 Residue Manager (24 pages)
- 2967 Notched Disc Residue Manager (24 pages)
- 2967-002 Single Wheel Residue Manager for Twin row (18 pages)
- 2967-003 Single Wheel Residue Manager For Monosem Planter (18 pages)