Yetter Avenger 25 - Manual (Page 6)

6
ASSEMBLY INSTRUCTIONS
STEP 3. Attach the 2986-111 hub and spindle assembly and the 2986-318 hub cap retainer to the 2986-
110 main arm assembly using 4) ½” x 1-1/2” hex head bolts. The spindle hub will be mounted on the right
hand side for a right hand coulter and on the left hand side for a left hand coulter.
STEP 4. Attach the 2986-203 tube and scraper mount arm to the 2986-111 hub assembly using 4) ½” x
1-1/2” hex head bolts.
STEP 5. Attach the 2571-200 – 25” coulter blade to the 2986-111 hub and spindle using 6) ½” x 1 ½” plow
bolts and ½” hex lock nuts. Tighten buts to 90-96 ft. lbs. of torque.