Yetter 1200-001 Row Unit Adjusting Device - Manual (Page 3)

3
OPERATING ROW
UNIT ADJUSTER
1. Place Row Unit Adjuster on
floor jack.
2. Raise jack with Row Unit
Adjuster under the Row Unit
disc blades.
3. Place bevel box on planter
frame – Front to Back, To set
“0” degrees, push on, then push
zero.
4. Place “zeroed” bevel box on
Row Unit Adjuster – Front to
Back.
5. Make adjustments to level the
Row Unit Adjuster by turning
the ¾” head adjustment knob
using a ¾” socket/ratchet
wrench. The bevel box will
display “0” degrees when Row
Unit Adjuster is level with the
planter frame.
NOTE: REPEAT STEPS 1-5 FOR
EACH ROW OF THE PLANTER