AT&T AT&T 1160 - Manual (Page 21)

1 8
4 When you finish entering the name,press
or
. The screen displays
5 Enter the telephone number. Use to
backspace and make a correction. Press
to store a pause in the dialing
sequence.
—OR—
Press
to display the last number
dialed from this phone.
6 Press or . The screen displays
7 Press or to change the setting. Choose
(for Yes) if you wish the phone to alert you to
calls from this number by changing to a
distinctive ringing pattern after the first ring.
Choose (for No) for a normal ringing
pattern.
8 Press or to confirm your
selection. If you chose in Step 7, a will be
displayed with the directory entry.
¥
NOTE: When memory is full the screen displays
, an error tone sounds, and you will
not be able to store a new number until you
delete a stored number.
91-5387-30-00_ATT1460_R1 2003.3.27 10:21 AM Page 18