Tuff Country 16993 - GM 01-09 K2500 HD 4wd 6 kit - Manual (Page 3)

Hardware bag 16985SL includes:
Description Quantity
S10007 (.500” x .380” x 1.700”) 2
S10058 (.875” x .500” x 2.080”) 4
S10067 (.500” x .380” x 2.610”) 2
S10073 (.687” x .563” x 1.320”) 2
S10074 (.687” x .558” x 1.500”) 4
S10082 (.875” x .563” x 2.080”) 1
Hardware bag 16985PL includes:
Description Quantity
PB6199 (short bump stop) 4
PB6052 (tall bump stop) 2
PB2408 (poly bushing) 10
MO2220 (poly bushing) 4
PB8016 (sway bar end link bushing) 8
S10049 (sway bar end link washer) 8
PB8297 (front shock upper bushing) 4
S10107 (front shock upper washer) 4
LUBE (poly lube pack) 2
Hardware bag 16985NB includes:
Bag # 1
Description Quantity
3/8” x 7” bolts 2
3/8” x 3 1/2” bolts 2
3/8” x 1 1/2” self threading bolts 2
3/8” unitorque nuts 10
5/16” USS flat washers 10
10 mm x 35 mm bolts 12
10 mm x 60 mm bolts 4
10 mm lock washers 16
1/4” x 1” self threading bolt 1
Bag # 2
Description Quantity
7/16” x 3” bolt 1
7/16” x 1 1/2” bolts 10
7/16” unitorque nuts 11
3/8” USS flat washers 22
Bag # 3
Description Quantity
1/2” x 2” bolts 4
1/2” x 3 1/2” bolts 4
1/2” unitorque nuts 8
7/16” USS flat washers 16
Bag # 4
Description Quantity
9/16” x 1 3/4” bolts 2
9/16” unitorque nuts 2
1/2” USS flat washers 4
Bag # 5
Description Quantity
5/8” x 4 1/2” bolts 2
5/8” x 5 1/2” bolts 2
5/8” unitorque nuts 4
9/16” USS flat washers 8
Hardware bag 14959NB1 includes:
Description Quantity
1/2” x 1 1/2” bolts 6
7/16” USS flat washers 12
1/2” unitorque nuts 6
Hardware bag 58NW includes:
Description Quantity
5/8” u-bolt high nuts 8
5/8” u-bolt harden washers 8
Special note: Before installation begins, it is the
customers/installers responsibility to make sure that
all parts are on hand. If any parts are missing, please
feel free to call one of our customer service
representatives @ (801) 280-2777.
Special post installation procedure: Tuff Country EZ-
Ride Suspension highly recommends adding a
minimum of 1 pint, but no more that 1 1/2 pints, of
proper front differential fluid into the front differential.
To achieve this, you may have to fill the differential
with it on its side or you may have to insert the fluid
through the vent tube opening. On occasion, the
customer may find burping of fluid coming out of the
front vent tube.
Recommended tools selection:
Torsion bar puller
(Part # 7822A / LSP code: 769 006 21)
Cut off wheel
Sawzall
Torque wrench
Standard socket set
Standard wrench set
Metric socket set
Metric wrench set
Tape measure
Hydraulic floor jacks