Tuff Country 16085 - GM 2011 Silverado 2500HD 6 box kit User Manual
Page 19
76. Locate (2) S10102 sleeves from hardware bag 16085PL.
Also, locate (2) 7/16” USS flat washers and (2) 1/2” uni-
torque nuts from hardware bag 16085NB2. Working on the
driver side, slide the new sleeve over the carriage bolt and
then install the new sway bar end link to the lower control
arm and secure using the new 1/2” hardware. Do not tight-
en at this point. Repeat procedure on the passenger side
77. Locate (4) sway bar end link bushings, (4) coned wash-
ers and (2) 3/8” fine nuts from hardware bag 16085PL.
Working on the driver side, install the newly installed end link
to the sway bar using the new poly bushings and hardware.
Do not tighten at this point. Repeat procedure on the pas-
senger side.
78. Working on the driver side, move back to the lower car-
riage bolt that is attaching the lower end link bracket to the
lower control arm and add some loctite and torque to 35 ft
lbs. Now, add some loctite to the 1/2” hardware that is
securing the end link to the lower bracket and torque to 75 ft
lbs. Finally, add some loctite to the sway bar end link where
it is attached to the sway bar and tighten until bushings starts
to bulge. Repeat procedure on the passenger side.
- 10701 - GM 69-91 Sway Bar Relcation Kit (3 pages)
- 10702 - GM 69-91 Transfer Case Drop Kit (3 pages)
- 10725 - GM Rear Brake Proportioning Valve Relocation Kit (2 pages)
- 10795 - GM 73-87 Traction Bars (4 pages)
- 10802 - GM 88-98 CV Alxe Spacer Kit (3 pages)
- 10803 - GM 88-98 CV Axle Spacer Kit (3 pages)
- 10804 - GM 88-98 CV Axle Spacer Kit (3 pages)
- 10805 - GM 88-98 CV Axle Spacer Kit (3 pages)
- 10806 - GM 88-98 CV Axle Spacer Kit (3 pages)
- 10807 - GM 88-01 Steering Assist (3 pages)
- 10850 - GM Sway Bar End Links (3 pages)
- 10855 - GM Sway Bar End Links (3 pages)
- 10860 - GM Sway Bar End Links (3 pages)
- 10890 - GM 88-98 Ladder Bars (4 pages)
- 10890 - GM 2011 Ladder Bars (5 pages)
- 10895 - GM 88-98 Traction Bars (4 pages)
- 10950 - GM Sway Bar End Links (3 pages)
- 10956 - GM Sway Bar End Links (3 pages)
- 10960 - GM Front Shock Relocation Bracket Kit (3 pages)
- 10961 - GM Rear Shock Relocation Bracket Kit (3 pages)
- 10962 - GM Front Shock Relocation Bracket Kit (3 pages)
- 10963 - GM Rear Shock Relocation Bracket Kit (3 pages)
- 10964 - GM Front Shock Relocation Bracket Kit (4 pages)
- 12000 - GM 07-11 2 leveling kit (4 pages)
- 12004 - GM 2011 Silverado 2500HD / 3500HD 2 leveling kit (4 pages)
- 12034 - GM 2011 Silverado 2500HD / 3500HD 2 lift kit (5 pages)
- 12610 - GM 69-72 2 box kit (8 pages)
- 12710 - GM 73-87 1/2 ton 2 box kit (8 pages)
- 12720 - GM 73-87 3/4 ton 2 bot kit (8 pages)
- 12730 - GM 88-91 1/2 ton Blazer / Sub 2 box kit (8 pages)
- 12740 - GM 88-91 3/4 ton Suburban 2 box kit (8 pages)
- 12903 - GM 88-06 K1500 torsion bar keys (4 pages)
- 12904 - GM 01-10 K2500HD/K3500HD torsion bar keys (3 pages)
- 12905 - GM 92-99 Suburban/Blazer torsion bar keys (3 pages)
- 12906 - GM 00-06 Suburban/Tahoe torsion bar keys (3 pages)
- 12908 - GM 04-12 Colorado / H3 torsion bar keys (3 pages)
- 12909 - Hummer 01-09 H2 torsion bar keys (3 pages)
- 13085 - GM 11-13 Silverado 2500HD 3.5 lift kit (11 pages)
- 13090 - GM 11-13 Silverado 3500HD 3.5 lift kit (11 pages)
- 13710 - GM 73-87 1/2 ton 3 box kit (8 pages)
- 13720 - GM 73-87 3/4 ton 3 box kit (8 pages)
- 13730 - GM 88-91 1/2 ton Blazer / Sub 3 box kit (8 pages)
- 13740 - GM 88-91 3/4 ton Suburban 3 box kit (8 pages)
- 14040 - Hummer H3 4 lift kit (21 pages)
- 14045 - GM Colorado / Canyon 4 lift kit (25 pages)