Tuff Country 14985 - GM 00-06 K2500 HD 4wd 4 kit - Manual (Page 3)

Hardware bag 14985SL includes:
Description
Quantity
S10067 (.500” x .375” x 2.610”) 2
S10073 (.690” x .560” x 1.320”) 2
S10074 (.700” x .563” x 1.500”) 4
S10082 (.875” x .563” x 2.080”) 1
Hardware bag 14985PL includes:
Description
Quantity
PB6199 (poly bump stops)
4
PB6052 (poly bump stops) 2
PB2408 (poly bushings) 2
PB4902 (poly bushings) 4
S10049 (sway bar end link washers) 8
PB8016 (sway bar end link bushings) 8
PB8297 (front upper shock bushings) 4
S10107 (front upper shock washers) 4
Poly
Lube Pack 2
Hardware bag 14985NB includes:
Bag # 1
Description
Quantity
3/8” x 7 ” bolts 2
3/8” unitorque nuts 8
5/16” USS flat washers 6
M10 x 35 mm bolt 12
M10 x 60 mm bolt 4
M10 lock washers 16
7/16” x 1 1/2” bolts 10
7/16” x 3” bolts 1
7/16” unitorque nuts 11
3/8” USS flat washers 22
9/16” x 1 3/4” bolts 2
9/16” unitorque nuts 2
1/2” USS flat washers 4
5/8” x 4 1/2” bolts 2
5/8” x 5 1/2” bolts 2
5/8” unitorque nuts 4
9/16” USS flat washers 8
1/4” x 1” self threading bolt 1
Hardware bag 58NW includes:
Description
Quantity
5/8” u-bolt high nuts
8
5/8” u-bolt harden washers 8
Special note: Before installation begins, it is the
customers/installers responsibility to make sure that
all parts are on hand. If any parts are missing, please
feel free to call one of our customer service
representatives @ (801) 280-2777.
Special post installation procedure: Tuff Country EZ-
Ride Suspension highly recommends adding a
minimum of 1 pint, but no more that 1 1/2 pints, of
proper front differential fluid into the front
differential. To achieve this, you may have to fill the
differential with it on its side or you may have to
insert the fluid through the vend tube opening. On
occasion, the customer may find burping of fluid
coming out of the front vent tube.
Torque settings:
5/16” 15 — 18 ft lbs.
3/8” 28 — 32 ft lbs.
7/16” 30 — 35 ft lbs.
1/2” 65 — 85 ft lbs.
9/16” 85 — 120 ft lbs.
5/8” 95 — 130 ft lbs.
3/4” 100 — 140 ft lbs.
10 mm bolt 34 — 49 ft lbs.
Recommended tools selection;
Torsion bar puller
(Part # 7822A / LSP code: 769 006 21)
Cut off wheel
Sawzall
Torque wrench
Standard socket set
Standard wrench set
Metric socket set
Metric wrench set
Tape measure
Hydraulic floor jacks