Tuff Country 10701 - GM 69-91 Sway Bar Relcation Kit - Manual (Page 2)

Limited Lifetime Warranty
Notice to all Tuff Country EZ-Ride Suspension cus-
tomers: It is your responsibility to keep your original
sales receipt! If failure should occur on any Tuff
Country EZ-Ride Suspension component, your origi-
nal sales receipt must accompany the warranted unit
to receive warranty. Warranty will be void if the cus-
tomer can not provide the original sales receipt. Do
not install a body lift in conjunction with a suspension
system. If a body lift is used in conjunction with any
Tuff Country EZ-Ride Suspension product, your Tuff
Country EZ-Ride Suspension WARRANTY WILL BE
VOID. Tuff Country Inc. (“Tuff Country” ) suspension
products are warranted to be free from defects in
material and workmanship for life if purchased,
installed and maintained on a non-commercial vehicle;
otherwise, for a period of twelve (12) months, from the
date of purchase and installation on a commercial
vehicle, or twelve thousand (12,000) miles (which ever
occurs first). Tuff Country does not warrant or make
any representations concerning Tuff Country Products
when not installed and used strictly in accordance
with the manufacturer’s instructions for such installa-
tion and operation and accordance with good installa-
tion and maintenance practices of the automotive
industry. This warranty does not apply to the cosmet-
ic finish of Tuff Country products nor to Tuff Country
products which have been altered, improperly
installed, maintained, used or repaired, or damaged by
accident, negligence, misuse or racing. (“Racing is
used in its broadest sense, and, for example, without
regards to formalities in relation to prizes, competi-
tion, etc.) This warranty is void if the product is
removed from the original vehicle and re-installed on
that or any other vehicle. This warranty is exclusive
and is in lieu of any implied warranty of merchantabil-
ity, fitness for a particular purpose or other warranty of
quality, whether express or implied, except the war-
ranty of title. All implied warranties are limited to the
duration of this warranty. The remedies set forth in this
warranty are exclusive. This warranty excludes all
labor charges or other incidental of consequential
damages. Any part or product returned for warranty
claim must be returned through the dealer of the dis-
tributor from whom it was purchased. Tuff Country
reserves the right to examine all parts returned to it for
warranty claim to determine whether or not any such
part has failed because of defect in material or work-
manship. The obligation of Tuff Country under this
warranty shall be limited to repairing, replacing or
crediting, at its option, any part or product found to be
so defective. Regardless of whether any part is
repaired, replaced or credited under this warranty,
shipping and/or transportation charges on the return
of such product must be prepaid by the customer
under this warranty.
Hardware bag 10701NB includes:
Description Quantity
GMSB-01 (front sway bar drop tubes) 2
716212B (7/16” x 2 1/2” bolts) 4
38WA (3/8” USS flat washers) 8
716UN (7/16” unitorque nuts) 4
Front sway bar relocation kit installation:
1. To begin installation, block the front and rear tires of the
vehicle so that the vehicle is stable and can’t roll forwards
or backwards.
2. Working on the driver side, remove the stock sway bar
from the stock frame rail. The stock hardware may be dis-
carded. Repeat procedure on the passenger side. Let the
stock front sway bar hang. Now is a good time to see how
the stock sway bar bushing look, if they look to be dam-
aged at all, Tuff Country would recommend replacing them
with an aftermarket poly bushing. If replacement is need-
ed, please order new replacement bushings and follow the
manufactures instruction on installation of new front sway
bar bushings.
3. Locate (2) new front sway bar relocation brackets, (4)
7/16” x 2 1/2” bolts, (8) 3/8” USS flat washers and (4) 7/16”
unitorque nuts from hardware bag 10701NB. Working on
the driver side, install the new front sway bare relocation
bracket between the stock sway bar and the stock frame
rail and secure using the new 7/16” x 2 1/2” bolts and hard-
ware. Do not tighten at this point. Repeat procedure on
the passenger side.
4. Working on the driver side, apply a small amount of
thread locker or lock tite on the new bolts and torque the
new 7/16” x 2 1/2” bolts to 42 ft lbs. Repeat procedure on
the passenger side.
Photo # 1 / driver side shown
Congratulations, installation complete. If you have any
questions or concerns, please feel free to contact Tuff
Country EZ-Ride Suspension.